ergodyne® ProFlex 7521 Thermal Coated Impact-Resistant Gloves: EN 388: 2131X, 10.5" Long, Medium (8), Gray, Pair (EGO17643) 1 Pair

SKU: 394250

Brand: ergodyne®

Category: Coated Gloves

Bulk Quote
Print

ergodyne® ProFlex 7521 Thermal Coated Impact-Resistant Gloves: EN 388: 2131X, 10.5" Long, Medium (8), Gray, Pair (EGO17643) 1 Pair

SKU: 394250

Brand: ergodyne®

Category: Coated Gloves

Bulk Quote
Print

$25.70

This item is non-returnable and may only be returned if item is damaged during shipment or defective.

Description

The ProFlex 7521 Thermal Coated Impact-Resistant Gloves deliver back-of-hand impact protection, thermal insulation and cut resistance for cold, tough jobs. A dual-layer knit shell pairs a warm 10-gauge brushed acrylic fleece liner with a durable 15-gauge polyester outer, while tri-hex TPR on the back of hand deflects blows and guards against pinch injuries. A full waterproof latex dip blocks out cold air and moisture, while a sandy nitrile palm coating adds abrasion resistance and a strong, flexible grip. Among the strongest coatings available, the sandy nitrile dip boosts glove durability while remaining comfortably flexible for enhanced dexterity and minimal hand fatigue. Built for impact-heavy work, these gloves meet ANSI/ISEA 138-2019 Level 1 standards. The 15-gauge polyester knit is tested to ANSI/ISEA 105-2016 level A2 cut protection and level 4 abrasion resistance for safety around sharp or rough materials. Classified by the weight needed to cut through, ANSI/ISEA 105-2016 level A2 is considered a relatively low-cut rating with a measure of 500 to 999 grams. Gauge indicates the number of stitching rows per inch—a higher gauge will have more flexibility and less bulk. When selecting safety work gloves, workers should look for the best possible balance of dexterity and protection for their job. Touchscreen-capable fingertips make it easy for workers to swipe, tap and type on smartphones and tablets without having to remove their work gloves. These waterproof work gloves meet the EN 388: 2131X standard. They are ideal for work in cold wet environments, including material handling and construction.
ANSI Abrasion Resistance Level 4
ANSI Cut Resistance A2
Anti-Vibration No
Case Pack 1 Pair
Color Family Gray
Color(s) Gray
Compliance Standards ANSI/ISEA 138-2019 Level 1; EN 388 2131X
EN 388 Badge 2131X
Global Product Type Coated Work Gloves
Glove Shell Synthetic Fabric
Length 10.5"
Material(s) Acrylic; Latex; Polyester; Silicone
Padded Knuckles Yes
Padded Palm No
Post-Consumer Recycled Content Percent 0%
Pre-Consumer Recycled Content Percent 0%
Product Biodegradability Indicator N
Product Compostability Indicator N
Size Number 8
Size Type Medium
Thickness/Gauge 15 ga
Total Recycled Content Percent 0%
Wrist Style Knit

We want you to be completely satisfied with your purchase. If you are not, you may return most items within 30 days of shipment, subject to the conditions below. 

General Returns:
If any item you purchased does not completely satisfy you or you change your mind, you may return it for a refund of the product total, less a 20% restocking fee, within 25 days of the shipment date. 

Items Not Eligible for Return:
Please note that not all items are covered by our standard return policy. Be sure to check the list of non-returnable items (listed below) as we cannot accept returns for them due to manufacturer policies. 

Damaged, Defective, or Incorrect Items:
If you receive a damaged, inoperable, or incorrect item, please report the issue immediately. All damage, defects, and shortages must be reported within [5] days of delivery. To initiate this process, please email CustomerCare@GoodEarthProducts.com with the following documentation: 

  • Photos of the issue: This helps our team determine the best course of action.
  • Photo of the package label: This helps us investigate what may have happened with the carrier. 

Return Process and Important Notes:

  1. Return Authorization Number (RA#): Please email CustomerCare@GoodEarthProducts.com to obtain a required Return Authorization Number (RA#) and further shipping instructions before sending any items back.
  2. Shipping Costs: Shipping and order processing charges are non-refundable. You are responsible for all shipping costs incurred, including the costs of returning the item(s) to us.
  3. Delivery Inspection: Please inspect all packages at the time of delivery for any obvious signs of damage.
  4. Delivery Confirmation: ReStockIt is not responsible for the replacement of any order that shows "signed for" upon delivery or has proof of delivery photo taken by the carrier.

 

We are unable to accept returns for the following items:

  • Clearance Products
  • Clearance or Final Sale Items
  • Consumable Food or Beverage Products
  • Dated Materials (including calendars, planners, organizers)
  • Hot/Cold Coolers
  • Items with a broken security seal
  • Opened Software (may be exchanged for identical title only)
  • Special Order Items
  • Vacuum Cleaners

****Items listed subject to change without prior notice****

 

IMPORTANT: You must obtain a Return Authorization (RA) number and an authorized return address prior to sending items back. We cannot accept unauthorized returns. Please email  CustomerCare@GoodEarthProducts.com before returning any items to begin this process.

If the guidelines for returns are not met, ReStockIt will not process the refund.

You may also like

Bulk Quote
Ordering Large Quantities of this Product?

Call our Direct Sales Department at (800) 803-5207 between 8:30 am and 5:00 pm ET, and speak with one of our Account Managers for special pricing opportunities. Or, fill out the form below and one of our Account Managers will get back to you quickly.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.